Effects of Synthesis Conditions on the Formation of Si-Substituted Alpha Tricalcium Phosphates

Powders of α-TCP containing various amounts of silicon were synthesized by two different methods: Wet chemical precipitation and solid-state synthesis. The obtained powders were then physico–chemically studied using different methods: Scanning and transmission electron microscopy (TEM and SEM), energy-dispersive X-ray spectroscopy (EDS), powder X-ray diffractometry (PXRD), infrared and Raman spectroscopies (FT-IR and R), and solid-state nuclear magnetic resonance (ssNMR). The study showed that the method of synthesis affects the morphology of the obtained particles, the homogeneity of crystalline phase and the efficiency of Si substitution. Solid-state synthesis leads to particles with a low tendency to agglomerate compared to the precipitation method. However, the powders obtained by the solid-state method are less homogeneous and contain a significant amount of other crystalline phase, silicocarnotite (up to 7.33%). Moreover, the microcrystals from this method are more disordered. This might be caused by more efficient substitution of silicate ions: The silicon content of the samples obtained by the solid-state method is almost equal to the nominal values.     

改进Elman神经网络在短期热负荷预测中的应用

热电厂的短期热负荷预测在城市集中供暖中起着至关重要的作用,直接影响热电厂的经济效益和热能利用率。电厂的短期热负荷一般采用神经网络预测模型进行预测,而BP神经网络应用最为广泛。Elman神经网络算法在BP神经网络基础上加入了承接层,作为一步延时算子,实现记忆能力,使系统具备适应时变能力,增强系统全局稳定性。但Elman神经网络算法模型的构造依然需要大量样本的支撑,而且输入层的变量多,导致预测时间依然很长,收敛速度慢。该文在Elman神经网络预测前,进行了相关系数预处理和对样本中异常值的平均化预处理,通过数据归一化运算,使Elman神经网络输入层变量大幅减少。仿真实验表明,改进的Elman神经网络算法使预测模型快速寻优,减少预测时间的同时明显提高预测精度。     

会计信息质量的非线性模型对公司价值的影响

从时代性、行业性及人力资源价值等方面分析了非线性因素对会计信息质量的影响,认为高质量的会计信息应该反映公司价值,并尝试建立了一个非线性模型,据此大体测算公司价值。     

Effect of CaO mineral change on coal ash melting characteristics

The change of mineral composition in ash and the effect of CaO on the melting characteristics of coal ash were studied by adding different contents of CaO to coal ash. At the same time, the Factsage thermodynamics software was used to simulate the mineral changes in the synthetic ash to support and verify the experimental results. The results show that with the increase of CaO content, the melting characteristic temperature of coal ash first decreases and then rises. After adding a certain amount of CaO, the quartz with higher melting point completely disappears, and the melting point of the coal ash reaches a minimum value. And with the increase of CaO content, the appearance of wollastonite and single crystal calcium oxide mineral makes the melting point of coal ash gradually increase. It can be seen from the phase diagram calculated by Factsage that as the CaO content increases, the corresponding position of the coal ash gradually moves from the hematite region to the calcareous region. And the phenomenon of low temperature eutectic occurs when the CaO content is 35%, which is consistent with the trend of temperature change of the melting characteristics. These phenomena all indicate that the change in the melting point of coal ash is nonlinear as the content of CaO minerals increases.     

The effect of traffic data source on deterioration rates of heavy-duty flexible pavements

The purpose of this study is to assess the effect of traffic data source (estimated vs. actual) on predicted progression rates of roughness and rutting for heavy-duty flexible pavements of rural freeways. Progression rates are predicted using calibrated HDM-4 models. The assessment is performed in terms of variations in maintenance intervention timing associated with the variations in progression rates. Time series pavement condition data (covering 3–5 years) have been collected for 7 sections of rural freeways for use in calibrating HDM-4 deterioration models. They range in length from 10 to 60.8 km and cover different traffic volumes, climate zones and subgrade soil types. For these sections, estimated annual average daily traffic (AADT), growth factors and assumed loading have been extracted from relevant database. Only six segments of these sections have Weigh-in-Motion (WIM) sites so relevant actual AADT, growth factors and axle load distributions have been extracted from WIM reports. The results of running the calibrated HDM-4 deterioration models using different traffic data show that actual traffic data from WIM sites result in higher rates of deterioration to that of estimated data for four sites, resulting in earlier intervention timing and higher present value agency cost. The other two sites have lower rates with actual data due to lower traffic loading than estimated.     

压裂水平井产能预测方法研究进展

水平井压裂技术在低渗透及非常规储层中得到了广泛应用,压裂后水平井的产能预测关系到油田开发方案的制定,因此,国内外学者对压后渗流模型的建立和求解方法做出了不懈的努力。本文详细回顾了国内外学者所建压裂水平井产能预测模型及求解方法,指出了不同模型和求解方法的优缺点,并展望了压裂水平井产能模型的发展方向。     

云计算在智慧医院信息服务中的应用

随着医疗服务体系的发展和进步,越来越多的医院开始将云计算技术引入信息服务系统,使医院信息化建设得到了迅速发展。文章分析了云计算技术的特点及其在智能医院信息服务中的应用和影响,以期促进该技术在未来的发展和推广。     

信息技术在医院病案统计中的应用

伴随着我国综合实力的不断提升,信息技术获得了突飞猛进的发展,如今,医疗改革如火如荼地进行,医院的信息管理工作同以往相比较也实现了极大的发展。病案统计工作是指相关工作人员对医院中患者的信息进行全面统计,若是这项工作完成得足够出色,会给医院后续的信息查询工作带来诸多方便和快捷,也能够在某种程度上使医院管理效率和质量实现一定幅度的提升。因此,将信息技术和医院的病案工管理工作进行密切结合,就成为病案管理人员应当重点思考的问题。病案统计工作是医院管理工作中的一个重点环节,病案统计结果能够为医院整体绩效带来十分深远的影响。因此,投入更多时间和精力来提高对这项工作的重视,显得十分关键和重要。文章对信息技术在医院病案统计中的应用展开了分析。     

浅析煤矿综采放顶煤安全开采问题

以煤矿放顶煤安全开采问题为对象开展分析探究。结合具体工程实际,在分析综放工艺技术特征的基础上,对综采放顶煤安全开采需注意的问题与防范措施开展深入分析,希望能够为其他矿井综放开采的有效开展提供借鉴和帮助。